CNC touch probe, capable of full X,Y and Z probing with our added probing macro for CNCjs.
This is ideal for saving time and helping to increase probing and setup accuracy.
The Vertigo Technologies designed touch probe features a recessed pocket to allow for quick and easy stock alignment. It also features a status LED.
- Touch probe (with 3m cable)
- CNCjs App
This probe will work out of the box with all Gen2 Vertigo CNC controller's (Gen2 controllers are the grey box that connects to the rear of the router).
The probe will work with all other Vertigo CNC routers but will require an extra adaptor and will require soldering to install. (Only on older generation CNC routers that have the controller mounted to the side of the gantry plate is this required).