bl Touch Probe
Genuine BLTouch! Great solution to easily implement auto bed-leveling! Comes with pre-crimped including spare connectors.
BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Self-test: The push pin operate two times in a test when the power is on.
Alarm: The LED light blinks if a problem was found on a self-test or during operation
Wiring defect indicator: Blue and Red LED for indicating wiring defects.
BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.
Logic Voltage Free
3.3V / 5V logic voltage free(default).
Long stroke : ≒ 6.5mm
The stroke becomes 1.6mm longer than the previous stroke.