UBlox NEO 7M GPS + Compass

Specification:

- tracking sensitivity:-161dBm
- Capture sensitivity:-148dBm
- cold start time:38s average
- Warm start time:35s average
- hot start time:1s average
- Capture time:0.1s Average
- Temperature:40 to +80
- wide power supply voltage:+3.5V~+5.5V

Description:

- Main chip:U-BLOX NEO-7M
- C/A code,1.023MHz
- Receiver Frequency:L1 [1575.42MHz]
- Locate performance
- 2D :3m(Average)
- 2D:2m(average),with WAAS
- drifting<0.02m/s
- accuracy:1us
- coordinate system:WGS-84
- max attitude height:18000

- Max speed:515m/s
- acceleration:<4g

These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play. This is NOT normally done in any other store!

Super Bright LED

BlackPlane with Standard Mk style mounting holes 45mm X 45mm

Blox Neo 7M Chipset

38400 bps (Default) Changed to 115200bps !

Output GGA, GSA and RMC frames

1Hz (Default) Changed to 5Hz!

Permanent Configuration Retention

Cable included

+ compass on board
+ 6 pin connector for EZ connect to MEGA BLACK
+ 4 pin connector for only GPS use
+ 4 pin connection for compass only use
+ GPS "PCB HOOD" for More EMI/RFI Shielding

can use both 4 pin at once

The GPS unit is per-configured for multiwii !! Unlike other shops send it out default settings, and yet you figure it out.

pre tested = PLUG AND PLUG for MWC 2.1!

MultiWii GPS assisted Position Hold and RTH functions